Cygnus Transducer Handler W1

This heavy duty solution is built from 316 stainless steel and designed for work-class ROVs. The W1 transducer handler can be held by a manipulator arm with either a T bar or Fish Tail handle. The innovative double-jointed coupling provides a full 15 degrees of movement in both planes - guided by four pins that act like finger tips - giving optimal alignment. A powerful shock absorbing spring reduces any impact. Any misalignment will then be taken up by the coupling resulting in less movement of the manipulator arm position.

The Cygnus W1 Transducer Handler is designed for Work Class ROVs.

Size 6.7 x 6 x 3.5 inch (exc. handle)
Weight in Air 11 lbs
Depth Rating 1,640 ft
Material 316 stainless steel
Spring Force 15 kg spring starts to compress
Transducer Types 2.25 MHz 13 mm with membrane (3.5 and 5 MHz at special request)
Transducer Cable 5 m double jacket coaxial (other lengths at special request)
Warranty 3 years / 6 months on transducers
Part Number 001-8311

Transducer Options

When ordering the W1 Transducer Handler you must order the appropriate transducer separately.

  S2C 2.25MHz Transducer for M5 ROV (P/N 001-8364)
  S2C 2.25MHz Transducer with Nosecone for M4 ROV (P/N 001-8317)

Manipulator Handles

½” T-Bar Handle (P/N 001-8315)
¾” T-Bar Handle (P/N 001-8314)
Fishtail Handle (P/N 001-8316)

1 review for Cygnus Transducer Handler W1

André L.

Aug 01, 2017 1:33 PM

We have used the probe handler W1 on a few projects in the North Sea and Baltic Sea with our ROV Panther XTP and it has proved to be a very useful and productive tool allowing us to carry out a UT reading within seconds whether it was probing a flat surface or a rounded surface, due to its design it is the perfect handle for subsea UT probing.

Your email address will not be published. Required fields are marked *

Your Rating